Why choose Avenir Renovations?
Redistribute spaces with lightweight partitions
Knauf or Placoplatre partitions: lightness and precision
As part of an office renovation, lightweight partitions on a metal frame — Knauf or Placoplatre systems — are an ideal solution for reshaping the interior layout without affecting load-bearing walls. Lightweight, quick to install, and perfectly smooth once finished, they allow for the creation of a functional workspace in an existing room, separating a desk area from a bedroom, reorganizing an oversized hallway, or setting up a quieter and better-structured professional space according to your needs. The cost of an office renovation then depends on several criteria, such as the area to be fitted out, the desired level of acoustic insulation, the chosen finishes, or additional work in electricity and painting.
Our craftsmen use laser to mark the partitions to ensure the plumb and squareness of each wall. The frame made of galvanized profiles is sized according to the ceiling height and acoustic constraints. The junctions with the floor, ceiling, and existing walls are carefully treated to avoid cracks over time.
Acoustic correction between rooms
As part of a bedroom renovation, a poorly designed lightweight partition can transmit sounds between rooms almost as much as an empty wall. The Avenir Rénovations team therefore systematically integrates acoustic insulation made of mineral wool within the thickness of the frame — a minimum of 45 mm rock wool — and can double the panels on the living side when sound performance needs to be enhanced. The profiles are also mounted on resilient strips to limit transmissions between the structure and the partition. During a bedroom renovation, this attention to acoustic insulation significantly improves daily comfort, especially between a bedroom, a hallway, or two workspaces.
Electrical conduits and device boxes are integrated into the thickness of the partition before closing, for clean and smooth walls.
The steps of the construction site
Transforming the interior of a home follows a logical sequence that cannot be disrupted without incurring costly rework. Here is how we organize each interior renovation project in Marche-en-Famenne.
Living in your house during the work
Avenir Rénovations organizes your interior renovations methodically: dust protection, staged planned interventions, and controlled timelines to maintain your comfort throughout the duration of the project.
An interior renovation project inevitably produces dust — sanding ceilings, cutting drywall, planing floors. When the house is occupied, our site manager organizes interventions by closed zones. Each work area is isolated from the rest of the home by containment tarps fixed to door frames. We use sanders equipped with HEPA vacuums and saws with integrated dust extraction to limit the spread of fine particles.
Furniture that cannot be moved is grouped together and completely covered with thick tarps. The floors of unaffected areas receive rigid protection panels to prevent damage from foot traffic. At the end of the day, a systematic dusting is performed to ensure that the inhabited areas remain livable.
A well-managed interior renovation follows a strict sequence that our specialists adhere to without exception:
- Demolitions and partitions — demolition of existing partitions if necessary, installation of new lightweight partitions on a framework;
- Electricity and technical ducts — chases, installation of ducts and boxes before closing the walls;
- Ceiling work — refurbishment or finishing of walls and ceilings, complete smoothing;
- Floor coverings — leveling if necessary, then installation of tiles, parquet, or vinyl;
- Interior carpentry — doors, latches, baseboards, thresholds;
- Painting and finishing — primer, finishing coats, careful cuts.
Following this sequence avoids costly rework — you do not re-ceiling after laying the floors, you do not paint before the carpentry is in place.
A partial interior renovation — one or two rooms, replacement of floors and refurbishment of ceilings — generally takes 1 to 2 weeks. A complete project on an entire floor, including partitions, general ceiling work, floors, and painting, requires 3 to 5 weeks depending on the size and initial condition of the building. These timelines are established from the quote so you can organize your daily life accordingly.
Price of an interior renovation in Marche-en-Famenne
Budgets depend on the area, the initial condition, the materials, and the level of finish. Indications including VAT:
| Item | Price indication (VAT included) |
| Interior renovation "turnkey" (excluding kitchen/bathroom), per m² | 500 to 1,000 €/m² |
| Partitions + Gyproc/Fermacell double layers (installation + finishes), per m² | 45 to 95 €/m² |
| False ceilings (structure + panels + finishes), per m² | 35 to 75 €/m² |
| Electricity brought up to RGIE standards (apartment/house, depending on area) | 2,500 to 6,000 € |
| Interior plumbing (repairs + water points), per point | 250 to 650 € |
| Complete bathroom (4–6 m²) | 7,500 to 14,000 € |
| Fitted kitchen (excluding premium appliances) | 8,000 to 18,000 € |
| Laminate/vinyl flooring (supply + installation), per m² | 35 to 85 €/m² |
| Engineered wood flooring (supply + installation), per m² | 55 to 120 €/m² |
| Tiling (supply + installation), per m² | 50 to 120 €/m² |
| Interior painting (preparation + 2 coats), per m² | 18 to 35 €/m² |
| Acoustic treatment (double layer/false ceiling), per m² | 60 to 140 €/m² |
| Opening in load-bearing wall + IPN (study included) | 1,200 to 3,500 € |
Note: a precise quote always follows a visit. We offer variations (ranges of materials, lighting options, finishes) to stay within your budget without sacrificing quality or durability.
Plastering: leveling surfaces
Repair of damaged or uneven plastering
In the Marchois houses from the 1960s to 1980s, interior plastering is often based on lime or traditional plaster applied in two or three coats. Over time, cracks appear, areas detach, and the surface loses its flatness. Before any painting or covering, these defects must be addressed at the root: it is not enough to patch the surface.
Our site manager assesses the adhesion of the existing plaster by percussion. Hollow or detached areas are chipped and repaired with renovation plaster or fine plaster, depending on the nature of the substrate. On heavily degraded surfaces, a complete plastering with a trowel — two coats of base plaster and one finishing coat — levels the wall with impeccable flatness. It is this preparatory work that conditions the quality of the final paints.
Treatment of cracks and junction repairs
Cracks at the ceiling-wall junctions, at inward corners, or in movement areas are treated with fiberglass mesh embedded in the plaster before smoothing. This technique prevents reopening at the first thermal movement. Junctions between different materials — Gyproc and traditional plaster, or concrete and masonry — receive the same treatment to ensure a homogeneous surface throughout the room.
Floors: installation and replacement in living areas
Support diagnosis before any installation
Before choosing a covering, our specialists check the condition of the screed or joists. A cracked, too thin, or hollow screed compromises any covering laid on top — tiles, parquet, or vinyl. Unstable areas are treated with epoxy resin, then a self-leveling compound is poured over the entire surface to achieve a perfectly flat surface before installation.
Replacement of floors in living areas
Our craftsmen work on all types of interior coverings. The large format tiles are suitable for living rooms, halls, and kitchens where ease of maintenance is a priority. The semi-solid parquet or high-resistance vinyl brings warmth and acoustic comfort to bedrooms and living spaces. Door thresholds and joints between different materials are carefully finished — transition strips, finishing profiles — for visual consistency throughout the house.
The order of intervention is non-negotiable: floors are installed after plastering and electrical work, never before. Respecting this sequence avoids re-cutting and damage to new coverings.
Paints and wall coverings
Interior finishes: the step that sets the tone
As part of a living room renovation, painting generally comes last in the construction sequence, once the surfaces are perfectly prepared. Our painters apply a suitable primer for each surface — new plaster, Gyproc, or old consolidated coating — before applying the finishing coat(s). The choice of finishes then depends on the room's use: matte velvet for living rooms and living spaces, washable satin for high-traffic areas or open kitchens, and moisture-resistant paint for wet rooms.
Cutting at the ceilings, baseboards, and door frames is done with a brush with precision that signifies the quality of the work. On large surfaces, the Airless technique allows for a smooth finish without grain or roller marks.
Decorative wall coverings
For rooms where you want to go beyond plain paint, the Avenir Rénovations team also installs wall coverings: non-woven wallpaper, PVC or MDF paneling, decorative coatings. These finishes dress and protect the walls while affirming the character of each space.
Kitchen and bathroom: components of the overall interior renovation
The kitchen renovation and the bathroom renovation are integral parts of a comprehensive interior renovation project. In this context, we address all surfaces as we do for the rest of the home: plastering, wall and floor tiling, painting, and interior woodwork. The more technical aspects related to kitchen renovation and bathroom renovation — plumbing, specific electrical work, installation of sanitary equipment or kitchen furniture — are detailed on dedicated pages of our site, where you will find all our services.
A rigorous and local site management
Coordination of trades and respect for deadlines
Carrying out interior work in a partially occupied house requires precise organization. Our team plans interventions so that trades follow one another without downtime, thus limiting the overall duration of the site and the inconvenience for the occupants.
Protection of inhabited areas and final cleaning
We use robust floor protections and dust capture systems to preserve areas not affected by the work. Once the site is completed, a final cleaning is ensured. You receive a clean and habitable interior immediately.
Common issues and our solutions
Ceiling plaster coming off in sheets
In houses in the Marche region built before 1970, it is not uncommon to find lime mortar ceilings applied over wooden laths. Over time and with humidity variations, the adhesion between the mortar and the support breaks: entire sheets threaten to fall. Attempting to patch or paint over does not solve anything. The Avenir Rénovations team completely removes the failing plaster, checks the condition of the structural support, then replasters anew on a framework or applies screwed Gyproc boards on a frame if the support cannot be treated directly.
Non-load-bearing partition to be demolished in an old house
In Marche buildings, some interior partitions made of solid bricks or concrete blocks can be confused with load-bearing elements. Avenir Rénovations conducts a structural analysis before any demolition. Strictly non-load-bearing partitions are cleanly demolished, debris is removed, and floor, ceiling, and wall connections are treated to leave no trace of the old partition.
Tile floor deformed by an unstable screed
It is common to discover, after removing old tiles in a Marche house, a screed that is too thin, unreinforced, or crossed with active cracks. Laying a new covering on an unstable support inevitably leads to detachment or breakage of the tiles in the short term. Our specialists treat the cracks with suitable epoxy resins, perform a self-leveling compound on damaged areas, and ensure a perfectly stable support before any flooring installation.
Frequently asked questions
Can we continue to live in the house during an interior renovation in Marche-en-Famenne?
This depends on the extent of the work. For a partial renovation — one bathroom or one room at a time — it is generally possible to stay on site. For a complete renovation of a floor or more, temporary accommodation is often preferable during the most intensive phases. Our site manager plans interventions to minimize the duration of the most constraining phases and helps you assess this question from the technical visit.
In what order do the works take place during a complete interior renovation?
The order is structured and non-negotiable: partitions and light demolitions first, then technical networks — electricity, ducts — before closing the walls. The plastering follows, then the floor coverings, interior woodwork, and finally the painting and finishes. Respecting this sequence avoids costly rework and ensures a coherent result.
What budget should be planned for a complete interior renovation in Marche-en-Famenne?
The budget varies greatly depending on the initial condition of the building, the materials chosen, and the work to be done. The advantage of the 6% rate applies to all work in homes over ten years old — a significant direct saving on a large project. Avenir Rénovations provides a detailed quote after a technical visit, with no obligation on your part.
Is a building permit required to demolish interior partitions?
In general, interior work that does not affect the load-bearing structure or the exterior appearance of the building does not require a building permit in Wallonia. However, as soon as one intervenes on a load-bearing wall — by creating a secure opening with a beam — it is necessary to check local requirements. Our specialists analyze the situation of your Marche building and inform you of your obligations before starting the site.
Your trusted partner in Famenne
Our Marche agency operates throughout the greater Marche — Waha, Marloie, Aye, Hargimont, On — as well as in neighboring municipalities such as Rochefort, Ciney, Hotton, Nassogne, and Durbuy. We understand the specifics of local construction and are committed to uncompromising quality.
Ready to transform your interior in Marche-en-Famenne?
Well-insulated partitions, smooth ceilings, floors laid to perfection, durable paints: these interior finishes make a difference every day. Contact us for a technical visit and a detailed quote — our team assesses the condition of your building, establishes the logical sequence of work, and guarantees a livable, comfortable, and well-maintained interior, room by room.
Agency Avenir
Rénovations
for Interior renovation work in Marche-en-Famenne
An expert to take charge of your renovation projects and guarantee deadlines, budgets and quality of all services.
Interior renovation work in Marche-en-Famenne and everywhere in France
Other work in Marche-en-Famenne
- Home renovation work in Marche-en-Famenne
- Masonry work in Marche-en-Famenne
- Apartment renovation in Marche-en-Famenne
- Bathroom renovation in Marche-en-Famenne
- Painting work in Marche-en-Famenne
- Home extension in Marche-en-Famenne
- Joinery installation work in Marche-en-Famenne
- Kitchen renovation in Marche-en-Famenne
- Attic renovation in Marche-en-Famenne
- Insulation renovation work in Marche-en-Famenne
- Facade renovation in Marche-en-Famenne
- Renovation work in Marche-en-Famenne
- Energy renovation in Marche-en-Famenne
- Outdoor fit-out in Marche-en-Famenne
- Terrace construction in Marche-en-Famenne
- Attic insulation in Marche-en-Famenne
- Interior fit-out in Marche-en-Famenne
- Roof renovation in Marche-en-Famenne
- Interior flooring in Marche-en-Famenne
- Exterior renovation in Marche-en-Famenne
- Installation of frames in Marche-en-Famenne
- Fit-out of accessible bathrooms in Marche-en-Famenne




